Down Converter KU LNC 25 TM

Features

Low noise converter for conversion of the 2.4 GHz TV radio link band to the SAT receiver range 1.433 ...1.633 MHz

Low noise figure and high gain

Use of the most advanced GaAs HEMT FET`s

It was possible by using 2 „Multilayered Ceramic Bandfilters“ for optimum bandselection at 2.4 GHz, as well as Schottky dioden mixer for a high dynamic range

Unconditionally stable. No parasitic oscillators in case of poor antenna match or by using filter - diplexer at relais radio stations.

Applications

The converter is suitable for all kinds of digital TV-modulation like DVBS - DVBT - COFDM - QPSK because of the high linearity and the good frequency stability (typ. +/- 20 kHz) and phase noise (only 115 dBc/Hz @ 10 kHz) of the SAW-oscillator

Specifications

Type	KU LNC 25 TM
Input frequency range	2350 ... 2550 MHz
IF Frequency	1433.5 ... 1633.5 MHz
Frequency stability	+/- 20 kHz
Gain	typ. 40 dB
Noise figure	0.7 dB NF
LO frequency	916.5 (SAW)
Supply voltage	+ 9 ... 18 V DC
Current consumption	typ. 70 mA
IF Output connector	F - female
RF Input connector	N - female
Dimensions mm	109 x 84 x 59
Case	Waterproof case